|
For your own custom installations, add-on or repairs |
|
| |
3/4" Electric Air Solenoid Valve |
|
High flow, 290 psi rating, with 3/4" NPT threads. CV rating of 12. Complete with electric coil, power cord & connector. The recommended valve for most air cannons. Available in 12V DC, 110V AC, 220V AC, 50/60 Hz. Specify Voltage. |
|
|
|
| |
|
Electric Coils: for the 3/4" Electric Air Solenoid Valve |
|
Specify voltage and valve type - 12V - 110V - 220V. |
|
|
|
| |
|
Manifold Relief Valve and Air Gauge for the Six Gallon Air Tank |
|
Replacement for the Six Gallon Air Tank. |
|
|
|
| |
|
3/4" x 45° Swivels |
|
For angling Air Cannon barrels up to 90°. Use two and get 180° turn radius. |
|
|
|
| |
|
CO2 Trigger Valve |
|
Mechanical 3/8" x 24 NF thread CO2 Valves. |
|
|
|
| |
|
CO2 Trigger Valve Repair Kit |
|
Kit Includes: Firing Pin, Trigger arm, Spring and O-ring. |
|
|
|
| |
|
3/8" - (NF) Milled & Ported Manifold |
|
Fits above mechanical valve. Complete with nuts, gaskets and washers. (quantities limited) |
|
|
|
| |
|
(Single) Mechanical CO2 Trigger Valve |
|
Completely assembled, for remote hose systems with mounting brackets, manifold bolt and brass 1/4" hose barb: (limited item purchase, NO manufacturers.) |
|
|
|
| |
|
(Double) Mechanical CO2 Trigger Valve |
|
Completely assembled, for remote hose systems with mounting brackets, manifold bolt and brass 3/8" hose barb: (limited item purchase, NO manufacturers.)
Double unit accepts: (2) two, 16 gram CO2 and fires them in tandem. Equivalent to 32 grams of power. More cost effective over the long term, as opposed to using one 38 gram in a single unit. Will also accept 2-25 grams or 1-38 gram and 1-16 gram cartridge. |
|
|
|
| |
|
3/8" - (NF) Straight Ported Bolt |
|
Hole all the way through. With hose barb and all hardware. |
|
|
|
| |
|
Clear Control Hose |
|
1/4" inside diameter x 100' long.
|
|
|
|
;)
back to Accessories list ;)
;)
;)
;)
;)
;)
;)
;)
;)
;){kind=spacer}
